|
Ar kurjeru visā Latvijā
|
Tomorrow (december 6) * | From 4,99 EUR |
Read more
| Type | Cordless chainsaw; AP16-56-507P |
| Feed | Battery / rechargeable powered |
| Weight, kg | 2.95 |
| Oil tank capacity, l | 0.25 |
| Sound pressure level, dB (A) | 95.5 |
| Sound power level, dB (A) | 102.4 |
| RPM, min-1 | 8000 |
| Voltage, V | 18; 36 |
| Battery capacity, Ah | 4.0 |
| Battery power, Wh | 72 |
| Battery type | Ličio jonų |
| Number of batteries in the set | 2 |
| Max. chain speed, m \ / s | 15 |
| Chain caliber | 0.375" - 3/8" - 9.53mm; 0.375"; 9.525 |
| Chain thickness, mm | 1.3mm / 0.050'' |
| Carbonless engine | Yes |
| Thickness, mm | 0.05" (1.3 mm) |
| Type of installation | P |
| Number of links in the saw chain | 56 |
| Chain \ / rail length, inches \ / cm | 16" / 40cm; 16" |
| Charger included | Yes |
| Uzlādes laiks, h | 2 |
| Juhi pikkus, mm | 400 |
| Battery capacity, mAh | 4000 |
| Max. chain travel speed, m/s | 15 |
The YATO YT-828131 cordless chainsaw combines the power of combustion engines with the convenience of battery operation. Its 16-inch guide bar and high chain speed make it ideal for cutting firewood, felling trees with a trunk thickness of up to 40 cm, and clearing land for construction purposes, as well as for cutting roof trusses on a building site.
This chainsaw is powered by two 18V YATO batteries working in parallel, generating a high voltage of up to 36V. This setup ensures extended operational time on a single charge, allowing for increased efficiency. When calculating the total energy available, we can consider 36V multiplied by 4Ah, which results in 144Wh (Watt-hours). This is significantly greater than that of a regular 18V device equipped with a 2Ah battery, which provides only 36Wh.
Key specifications: Voltage: 36V (dual 18V), Battery: 2x4Ah with a double charger, Operational speed: 6000-8000 RPM, Engine type: brushless, Chain speed: 12-15 m/s, Oil tank capacity: 250 mL, Cover material: Nylon, Maximum cutting length: 395 mm (16"), and a compact design with separate buttons for tension adjustment and cover opening. The tool is designed for safety with a dedicated switch to prevent accidental activation and provides low noise output.
