Discover the secret to perfect distillation with the BROWIN HawkStill ColdFingers 60.3mm PowerReg. This efficient and practical distiller set is designed to meet the high expectations of professionals while also being user-friendly for less experienced users, delivering excellent results.
HawkStill "Cold Fingers" 60 L Distiller with Power Regulator is the fundamental model of a line of high-quality distillers featuring electric modules and an efficient 60.3 mm diameter column. This professional distiller is equipped with a spacious 60 L container, "Cold Fingers" reflux unit, condenser, and a power regulator for the heater that allows for easy control of the distillation process. If you are searching for a complete set with high-quality stainless steel components and easy-to-operate, efficient modules, look no further than the HawkStill!
This distiller should be used with a heater that has a total power of 3500 W.
What makes the BROWIN HawkStill "Cold Fingers" distiller stand out?
- High efficiency - The modular design with a 60-liter container and appropriately sized column enables efficient distillation of large volumes (it is recommended not to exceed 90% of the total capacity).
- High quality - This distiller combines the benefits of stainless steel (INOX) with durability, tightness, precise connections, and long-lasting individual components.
- Column with an outer diameter of 60.3 mm - This optimizes process efficiency. The column is split into two modules: a catalyst with copper springs to purify the distillate from sulfur compounds, and a second connector with stainless steel scrubbers to achieve higher strength and purity of the distillate.
- "Cold Fingers" Reflux - Acts as a dephlegmator, regulating water flow to perfectly pre-clean distillate vapors. You can adjust the amount of distillate returned to the filling, controlling its strength, purity, and aroma.
- Openable container with a dome lid (Convex type) - This container is secured with a tight dome lid that allows for safe handling of any foam from the mash or wort, increases stability of the entire column, and positively impacts the distillation process. The removable lid makes using and cleaning the container easier.
- Complete set - The set includes a container with a dome lid, a column with reflux, a condenser, a ball drain valve, two electronic thermometers with probes, two hoses, a water supply connection connector, two sets of Tri-Clamp clamps with gaskets, stainless steel filling, sealing Teflon tape, assembly elements, and instructions.
- Controlled process - You will no longer have to worry about burning the mash, overflowing the column, or collecting the end product too quickly.
The set's functionality is also enhanced by the following elements:
- Two column connectors - They act as rectifiers, and their filling increases the purity of the distillate.
- Tri-Clamp connectors - These facilitate the assembly of individual modules, making the device assembly quick and convenient.
- Column insulation - It reduces heat loss and allows the process to be conducted at a lower ambient temperature.
- Two electronic thermometers - They provide precise temperature measurements during the distillation process.
- Heater with a total power of 3500 W (1500 W and 2000 W options) ensures suitable temperature parameters.
- Removable lid allows for thorough cleaning of the tank and convenient pouring of contents, while some elements can be stored inside the container, requiring minimal space for storage.
The container, head, reflux, and column connectors are made from stainless steel (INOX).
SET COMPONENTS:
- Convex type container with a capacity of 60 L
- Column connectors (2 pcs, catalyst 240 mm, column 1000 mm)
- "Cold Fingers" reflux
- Head with condenser
- Electronic thermometer with probe (2 pcs)
- Column insulation (made of polyethylene) (2 pcs)
- 5 m PVC hose – for water connection, with a quick connector for easy tap connection
- 2 m silicone hose – for distillate collection, safe for alcohol contact
- 1/2 inch ball drain valve – for 60 L container
- Tri-Clamp clamps and gaskets (2 pcs)
- Stainless steel filling (24 pcs)
- Copper filling 0.5 L
- Sealing Teflon tape
- User manual
- Heater with a total power of 3500 W, including two heaters powered by independent cables – one with 2000 W and the other with 1500 W.
- Power regulator
Container:
- Four carrying handles
- Six snap clamps
- Lid with built-in silicone gasket
- Rigid dome lid with an opening for column assembly
- Hole in the container wall for thermometer probe and heater
- Socket for drain valve and matching ball valve for assembly
Catalyst:
- Module height: 240 mm
- Outer diameter of the module pipe: 60.3 mm
- End with Tri-Clamp connectors
- Filling capability
- Recommended filling with copper
- Filling capacity: 0.6 L
Module with condenser and "Cold Fingers" reflux:
- Height: 1000 mm
- Outer diameter of the pipe: 60.3 mm
- End with Tri-Clamp connector
- Six "cold fingers" (made from 10 mm pipe)
- Filling part capacity: 2 L
Head with condenser:
- Cooling part height: 250 mm
- Outer diameter of the pipe: 60.3 mm
- Pipe connecting the column with the head diameter: 18 mm
- Water connection - welded into the condenser pipe: 10 mm
- Thermometer inlet
The upper part of the head has a place for the thermometer probe, allowing for direct vapor temperature control throughout the process.
Power regulator:
- Connects heaters with power up to 2 kW
- Smooth power regulation using a knob, ranging from level 1 (MIN) to 6 (MAX)
- Power supply: 230 V
- Fuse: 10 A
Distiller dimensions (when assembled):
- Height: 192 cm
- Front width: 510 mm
- Side width: 440 mm
Note! Before use, it is imperative to read the instructions included with the product as well as the rules for its use, cleaning, and maintenance. Following the provided recommendations ensures effective and safe usage of the distiller over time.
CAUTION!
Every country has its own legal regulations governing the manufacturing of ethyl alcohol, wine products, and spirits, as well as sanctions for non-compliance.
Read more
