Lodāmurs 30W, spics uzgalis, STHOR

The STHOR 79365 soldering iron is a reliable and efficient tool designed for various soldering tasks. It features a traditional design with a resistance heater powered directly from a wall outlet, ensuring it is nearly failure-proof with proper care.

• Power supply: 230V
• Heater power: 30W
• Depth of tip hole: approximately 50 mm
• Maximum diameter of tip: 4.4 mm

Dimensions of the soldering iron:

• Length: approximately 65 mm
• Diameter: 3.7 mm
• Diameter of tip: 1.0 mm

Other dimensions:

• Total length with bent cable: 230 mm
• Handle length: approximately 120 mm
• Power cord length: 140 cm

The soldering iron heats up to 350°C in just 3 to 4 minutes.

Maintenance tips for the soldering iron tip:

The tips of STHOR soldering irons are coated with a material that minimizes oxidation. However, prolonged heating and mechanical damage can degrade this protective layer, which may lead to oxidation problems when soldering. A simple method to maintain the tip is to tin it: when the soldering iron is warming up, apply a small amount of solder to the tip and remove the excess with brass shavings. This will create a protective layer that helps prevent oxidation. It is advisable to tin the tip after each use.

Important note:

Soldering irons powered directly from a wall outlet must be used with a plug that has a grounding pin and should be connected to a grounded outlet to avoid electric shock, which can lead to injury. All STHOR soldering irons come with a grounded plug connected to the metal heater housing.

• Series: GRD
• Power: 30 W
• Voltage: 230 V a.c.
• Frequency: 50 Hz
• Max. temperature of soldering tip: 400 ˚C
• Heating time: 5-10 min
• Soldering tip dimensions: Ø4x70 mm
• Wire length: 1.3 m
• Wire section area: 3Gx0.5 mm²
• Wire insulation type: H03VV-F
• Electric insulation class: I
• Weight: 0.16 kg