|
Ar kurjeru visā Latvijā
|
Tomorrow (december 6) * | From 3,99 EUR |
Read more
| Type | Pneumatinis tinkavimo įrenginys |
| Feed | Air-powered / pneumatic |
| Weight, kg | 2; 2.1 |
| Working pressure, bar | 4 — 8 |
| Air intake, l / min | 350 — 400 |
| Air flow, l \ / min | 400 |
| Tank capacity, l | 4.75 |
| Size, mm | 860x220x220 |
| Lock | 1/4" |
| Diameter, mm | 17.5 |
| Designed for materials | For Concrete |
| Rankenos ilgis, mm | 600 |
| Darbinis slėgis, Mpa | 0.8 |
| Inner diameter, mm | 1014 |
| Recommended working pressure | 0.4 — 0.8 |
The YATO YT-54400 Pneumatic Plaster Spray Gun is designed for quick and effective application of plaster on walls. Constructed from stainless steel and high-quality plastic, this tool features a brass valve and air connections for optimal performance.
This spray gun significantly accelerates the plastering process while improving texture quality. It is equipped with a large, convenient handle that facilitates maneuverability during use. The tank capacity is approximately 4.75 liters, with four exhaust nozzles designed for average efficiency of around 50 m² per hour when operated by one person. The device weighs 2.1 kg and requires air pressure between 4-5 bar for optimal operation. A compressor performance of 350 l/min is necessary to ensure swift and effective plaster application.
To operate, connect the spray gun to a compressor via a pneumatic hose, fill the tank with the appropriate plaster mix, point the nozzles towards the wall, and open the intake valve to spray evenly as needed. After use, immerse the plaster tank in water and rinse thoroughly.
Usage warnings:
Warning! Always use personal protective equipment when operating this tool. Maintain a close distance to the wall when working, keeping nozzles 5-10 cm away from the plastered surface.
