|
Ar kurjeru visā Latvijā
|
You will be contacted about delivery time. | From 3,49 EUR |
Read more
| Type | Torch |
| Power, W | 13000; 19500 |
| Hose length, m | 2 |
| Application temperature, ° C | 1500 — 1800 |
| Gas consumption (average), g \ / h | 930 |
| Nozzle size, mm | 25; 35; 50 |
| Darbinis slėgis, Mpa | 0.4 |
| Flame temperature, ˚C | 1500~1800; 1500 — 1800 |
The VOREL Roof Heating Torch with Burners (model code 73340) is an essential tool for roofing professionals, specifically designed for typical heat-sealed membrane installation work. This set includes a handle with a valve lever for ease of operation, a 2-meter hose with connections to the cylinder and handle, and three flame nozzles for various heating needs.
This gas burner is suitable for tasks such as heating, drying, and roofing. Powered by compressed butane cylinders (it can also utilize a propane-butane gas mixture), it is perfect for use in locations without direct energy sources.
Package Contents
How to Use
Assemble the device according to the instruction manual. Securely attach the hose to the assembled device, then connect the other end to the gas cylinder.
Check for any gas leaks by slightly turning on the cylinder valve and applying soapy water to the connections. If bubbles appear, carefully tighten the leaking connections until no leaks are present.
After securing the gas valve on the cylinder, gently open the appliance valve to allow gas to flow, and ignite the gas using a lighter designed for portable gas burners. After approximately 20 seconds, press the burner lever. If the flame is too short, adjust the gas pressure via the burner valve. Releasing the lever will return the flame to economy mode.
Once you finish using the torch, turn off the cylinder valve, and after the flame is extinguished, place the burner on a non-flammable surface to cool down. Once cooled, proceed to maintain the device.
For detailed installation, operation, and maintenance information, refer to the attached instruction manual.
